Sony DPP-F800 Operating Instructions - Page 22
Connecting to the AC power source, into the DC IN 24V jack on the back
View all Sony DPP-F800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Notes • Check whether this unit is stable. If the unit is not set properly, it may fall over. • The Sony logo does not light up when this unit is placed vertically or turned off. • You can also rotate the image manually. (page 51) • To print a picture, set this unit in the print position (flat position) (page 32). Connecting to the AC power source 1 Insert the plug of the AC Adaptor into the DC IN 24V jack on the back of this unit. 2 Connect one plug of the power cord to the connector of the AC Adaptor and the other plug to the wall outlet. This unit automatically turns on. 22 GB AC Adaptor Power cord To the wall outlet A socket outlet should be as close as possible to the unit and easily accessible. Notes • Do not place this unit in an unstable location such as on a wobbly table. • Connect the AC Adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet. • Do not short the plug of the AC Adaptor with a metallic object, as this may cause a malfunction.