Sony DPP-F800 Operating Instructions - Page 23
Turning this unit on, To use this unit abroad - Power, sources, Turning on the power
View all Sony DPP-F800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
• Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • When not in use, remove the AC Adaptor from the DC IN 24V jack of this unit and the power cord from the wall outlet. • This unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the printer itself has been turned off. To use this unit abroad - Power sources You can use this unit and the AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50Hz/60Hz. Do not use an electronics transformer (travel converter), as this may cause a malfunction. Turning this unit on When you have already turned on this unit in the previous section, skip to the next section. Turning on the power Press 1 (on/standby) on this unit or remote control to turn on the power. The standby indicator turns to green from red. The Sony logo on the front panel lights up. Using as a photo frame Turning off the power Hold 1 (on/standby) on this unit or remote control until the power turns off. The standby indicator on this unit turns from green to red and this unit enters standby mode. Notes Do not disconnect the AC Adaptor from the wall outlet or DC IN 24V jack before the standby indicator turns red. Doing so may damage this unit. Continued 23 GB