Sony DPP-F800 Operating Instructions - Page 95
Others
View all Sony DPP-F800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Symptom Check item Cause/Solutions Even though "Borderless" is selected, the image is printed with borders. • Are you using an application software other than PMB? c When using an application other than the PMB, an image might be printed with borders even if you select borderless print. When you can set border/borderless with an application, set an image to be printed fully in the print range even if it is printed over the range. No. of prints specified in the "Pages Per Sheet" in the "Layout" tab of the "Sony DPPF800 Properties" dialog box does not match the actual No. of prints and printed results. - c Depending on the application you use, the No. of prints setting of the application you use may have priority over the setting specified in the printer driver dialog box. Colors of the printed image from a computer are different from those printed from a memory card. - c Since the process in printing an image from a memory card differs that in printing from a computer, the colors may not be exactly identical. An error stating "Error was found while a document is output to the USB device." is displayed. - c Disconnect the USB cable and then connect it again. Others Symptom You cannot insert the ink ribbon smoothly. Check item - The ink ribbon - cannot be removed. Cause/Solutions c If the ink ribbon does not click into place, remove it and then re-insert it. Only when the ink ribbon is too slack to be loaded, remove the slack. (.page 33) c Turn this unit off using the 1 (on/ standby) button and then turn it on again. After the sound of movement inside this unit stops, try to remove the ink ribbon. If this does not solve the problem, contact Sony service facilities or your Sony dealer. If trouble occurs 95 GB