Sony DPP-MP1 Operating Instructions - Page 13

Preparations 4 Inserting the "Memory Stick" 2 Pull out the "Memory Stick". Insert a "Memory Stick" into the unit as shown below. Be sure to push the "Memory Stick" all the way in, until it audibly snaps into place. "Memory Stick" MS ACCESS indicator Insert with cutoff section facing left and arrow at top left. To remove the "Memory Stick" 1 Verify that the MS ACCESS indicator is out. Then push the "Memory Stick" fully into the unit. When you let go, the "Memory Stick" will pop out slightly. Notes • While the "Memory Stick" is being accessed, the MS ACCESS indicator lights up. Do not remove the "Memory Stick" from the unit during this interval. Otherwise the unit and/or the "Memory Stick" may be damaged. • Do not forcibly push or remove the "Memory Stick" into or from the unit. Otherwise the unit and/or the "Memory Stick" may be damaged. • While printing is in progress, do not remove the "Memory Stick" from the unit. Otherwise the unit and/or the "Memory Stick" may be damaged. • The maximum Memory Stick capacity with which this unit is compatible is 128 MB. • For information and precautions regarding the handling of the "Memory Stick", see the section "Memory Stick" on page 27. MS ACCESS indicator 13 GB