Sony DPP-MP1 Operating Instructions - Page 14

Printing Operation During Printing Print paper moves back and forth During printing, the print paper passes four times back and forth between the paper exit slot and the top of the paper tray. When printing is completed, the paper is ejected from the paper exit slot. Print paper • Do not open the print cartridge door or remove the print cartridge from the unit during printing. • Never move the unit during printing, and do not turn off the power. Otherwise a paper jam may occur or the unit may be damaged. If the power was interrupted during operation, turn the power on again and repeat the procedure. Print cartridge door Notes • Place the unit on a flat, level surface for printing. If there is for example a raised section or a wall behind the unit, paper jams can occur. • Before starting to print, make sure that there are no obstructions behind the unit which could block the smooth exit of the paper. There should be a clearance of at least 12 cm. • Do not place any objects on top of the paper tray. • Do not touch the paper during printing, and do not try to pull the paper out. • Do not pull the paper tray out of the unit during printing. 14 GB