Sony DPP-MP1 Operating Instructions - Page 21
Print settings, To change another setting
![]() |
UPC - 027242594371
View all Sony DPP-MP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Print settings You can select various settings for the image before printing. 1 Hold down the ENTER button for at least 2 seconds. The print settings mode is activated, and the indication "SHARP" flashes on the display. 2 Use the SELECT (-/+) buttons until the desired setting item flashes on the display. • Pressing SELECT (+) causes the display to cycle through available items in the order "SHARP" t"BRIGHT" t "DATE" t"FIT" t "MULTI" t"SHARP" etc. • Pressing SELECT (-) cycles in the opposite direction. The available settings are explained in the table "Print Setting Items" at the end of this section. 3 Press the ENTER button. The selected setting for the flashing item is shown. 4 Use the SELECT (-/+) buttons to change the setting. For example, if "DATE" is flashing, each push of the SELECT (-/+) button toggles between "ON" (date is printed) and "OFF" (date is not printed). 5 Press the ENTER button. • The print setting mode is terminated and the unit returns to the normal mode (print standby). • The current print setting can be checked by the display indication. DATE To change another setting Repeat this procedure from step 1. Printing Continued 21 GB
![](/manual_guide/products/sony-dppmp1-operating-instructions-211ee80/21.png)