Sony DSC-RX100M5 Picture Profile: Help Guide for Creators (Printable PDF) - Page 17

Knee > Auto Set > Sensitivity, High / Mid / Low, Knee > Manual Set > Point, to 105, Knee

Get Sony DSC-RX100M5 PDF manuals and user guides View all Sony DSC-RX100M5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Knee > Auto Set > Sensitivity High / Mid / Low Knee > Manual Set > Point 75% to 105% Knee > Manual Set > Slope -5 to +5 Mode Auto: Automatically adjusts the knee based on what is selected in the following settings (when [Movie] or [ITU709] is selected in [Gamma]). [Max Point] determines the maximum knee point level (white level). The knee slope is automatically adjusted according to the Max Point setting. The standard is to keep it at 100%. A lower setting will turn white grayish, while a higher setting will discard gradations in high luminance areas. [Sensitivity] changes the luminance level at which the knee's automatic adjustment starts. When set to [Low], the knee's automatic adjustment starts at lower input signal levels than normal. When set to [High], the knee's automatic adjustment starts at higher input signal levels than normal. When a parameter other than [Movie] or [ITU709] is selected in [Gamma], the gamma curve will not exceed the White clip point and over-exposure rarely occurs. When [Mode] is set to [Auto] with these settings, the Knee function is disabled. If you want to enable the Knee function, set [Mode] to [Manual]. Manual: Sticks to settings based on the following selections.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
Knee > Auto Set > Sensitivity
High / Mid / Low
Knee > Manual Set > Point
75% to 105%
Knee > Manual Set > Slope
–5 to +5
Mode
Auto:
Automatically adjusts the knee based on what is selected in the following settings (when
[Movie] or [ITU709] is selected in [Gamma]).
[Max Point] determines the maximum knee point level (white level). The knee slope is
automatically adjusted according to the Max Point setting. The standard is to keep it at
100%. A lower setting will turn white grayish, while a higher setting will discard gradations
in high luminance areas.
[Sensitivity] changes the luminance level at which the knee’s automatic adjustment starts.
When set to [Low], the knee’s automatic adjustment starts at lower input signal levels
than normal. When set to [High], the knee’s automatic adjustment starts at higher input
signal levels than normal.
When a parameter other than [Movie] or [ITU709] is selected in [Gamma], the gamma
curve will not exceed the White clip point and over-exposure rarely occurs. When [Mode]
is set to [Auto] with these settings, the Knee function is disabled. If you want to enable the
Knee function, set [Mode] to [Manual].
Manual:
Sticks to settings based on the following selections.