Sony DSR 11 Operating Instructions - Page 23
Settings for Playback
View all Sony DSR 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 2 Playback and Recording Settings for Playback Preparation on the player (this unit) Note Various text data are superimposed and output from the VIDEO jack or the S VIDEO connector on the OUTPUT jacks. If you want to record video signals without text data, carry out the following operations. • Set TITLE DISP and LABEL DISP on the CM SET menu to OFF. • Depending on the displayed items, press the MENU, DATA CODE, DISPLAY or SEARCH SELECT button on the Remote Commander to clear the text data on the monitor screen. For details on text data, see "Displaying data recorded on a tape" on page 25 (GB) and "Displaying various data" on page 26 (GB). For details on the CM SET menu, see "CM SET menu" on page 46 (GB). 1 Power on the video monitor, then set the monitor's input switch according to the signals input from the recorder. 2 Set up the recorder. For details, refer to the instruction manual of the recorder. 3 Power on this unit by pressing the ON/STANDBY switch on this unit. 4 When you play back a tape recorded in 4-channel mode (Fs32k), adjust the balance between channel 1/2 and channel 3/4 with AUDIO MIX on the AUDIO SET menu. For details on the AUDIO SET menu, see "AUDIO SET menu" on page 44 (GB). Note The AUDIO MIX on the AUDIO SET menu (audio balance adjustment) does not function on the source audio output through the DV IN/OUT connector. 23 Chapter 2 Playback and Recording (GB)