Sony DSR 11 Operating Instructions - Page 36
unit to prevent a humming noise or distortion of the picture.
View all Sony DSR 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Recording To video equipment without a DV jack Player Other VCR Monitor to the audio output jacks to the video output jack to the S-video output connector to the LANC jack Recorder DSR-11 Chapter 2 Playback and Recording Audio cable (not supplied) Video cable (not supplied) S-video cable (not supplied) LANC cable (not supplied) l: Signal flow Connect either an S-video cable or a video cable as the cable for video signals. Notes • When recording analog input signals, this unit can digitally output the signals from the DV IN/OUT connector for backup. Set DV EE OUT on the VTR SET menu to ON. For details on the VTR SET menu, see "VTR SET menu" on page 43 (GB). • When you connect the output jacks of this unit to the input jacks of the player, select the input correctly with the INPUT SELECT selector on this unit to prevent a humming noise or distortion of the picture. • Distorted signals (e.g., when played back at a speed other than normal) will not be recorded properly. Notes for the LANC connection • The LANC connection transmits signals such as control signals, time code, time counter data, and status data. • Jacks labeled CONTROL L have the same function as LANC jacks. Jacks labeled REMOTE may also have the same function. 36 (GB) Chapter 2 Playback and Recording