Sony DSX-MS60 Operating Instructions - Page 12
Searching a track by listening to track passages - ZAPPIN™, Radio, Storing and receiving stations - parts
UPC - 027242807037
View all Sony DSX-MS60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Searching a track by listening to track passages - ZAPPIN™ While playing back short track passages in a USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. (BACK) Select button ZAP 1 Press (ZAP/SHUF) during playback. After "ZAPPIN" appears in the display, playback starts from a passage of the next track. The passage is played for the set time, then a click sounds and the next passage starts. Track The part of each track to playback in ZAPPIN mode. 2 Press the select button or (ZAP/SHUF) when a track you want to listen is played back. The track that you select returns to normal play mode from the beginning. To search a track by ZAPPIN mode again, repeat steps 1 and 2. Tips • You can select the playback time from about 6 seconds/15 seconds/30 seconds (page 20). You cannot select the passage of the track to playback. • Press +>/-. in ZAPPIN mode to skip a track. • Pressing (BACK) also confirms a track to playback. Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically - BTM 1 Press (SOURCE/OFF) repeatedly until "TUNER" appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press and hold the select button. The setup display appears. 3 Press the select button repeatedly until "BTM" appears. 4 Press +>. The unit stores stations in order of frequency in the preset list. A beep sounds when the setting is stored. Storing manually 1 While receiving the station that you want to store, press (BROWSE). The preset list appears. 2 Rotate the control dial to select the preset number. 3 Press and hold the select button until "MEMORY" appears. (with the card remote commander) 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEMORY" appears. Note If you try to store another station on the same number button, the previously stored station will be replaced. 12