Sony DSX-MS60 Operating Instructions - Page 6
Getting Started, Resetting the unit, Canceling the DEMO mode, Preparing the card remote commander
UPC - 027242807037
View all Sony DSX-MS60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the boat battery or changing the connections, you must reset the unit. Detach the front panel (page 7) and press the RESET button (page 8) with a pointed object, such as a ball-point pen. Note Pressing the RESET button will erase the clock setting and some stored contents. 4 Rotate the control dial to set the hour and minute. To move the digital indication, press -./ +>. 5 After setting the minute, press the select button. The setup is complete and the clock starts. To display the clock, press (DSPL). Press (DSPL) again to return to the previous display. Tip You can set the clock automatically with the RDS feature (page 14). Canceling the DEMO mode You can cancel the demonstration display which appears during turning off. 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until "DEMO" appears. 3 Rotate the control dial to select "DEMO-OFF." 4 Press and hold the select button. The setup is complete and the display returns to normal reception/play mode. Preparing the card remote commander Remove the insulation film. Tip For how to replace the battery, see page 22. Setting the clock The clock uses a 12-hour digital indication. 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until "CLOCK-ADJ" appears. 3 Press +>. The hour indication flashes. 6