Sony DSX-MS60 Operating Instructions - Page 26
Error displays/Messages, USB NO SUPRT - problems
UPC - 027242807037
View all Sony DSX-MS60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
The display items do not scroll. • A large number of characters may not scroll. • "A.SCRL" is set to "OFF." t Set "A.SCRL-ON" (page 20). t Press and hold (DSPL) (SCRL). A beep sounds. During playback, the USB device has been disconnected. t Before disconnecting a USB device, make sure to stop playback first for data protection. The sound is intermittent. The sound may be intermittent at a high-bit-rate of more than 320 kbps. Error displays/Messages CHECKING The unit is confirming the connection of a USB device. t Wait until confirming the connection is finished. DEVICE INSIDE If you turn the ignition switch to the OFF position without removing the USB device or iPod, "DEVICE INSIDE" will appear in the display. ERROR USB device was not automatically recognized. t Reconnect it again. FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation/connections manual of this model to check the connection. FAILURE (Illuminates for about 1 second.) When the SAT tuner is connected, storing an SAT radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. HUB NO SUPRT (HUB Not Support) USB hub is not supported on this unit. L. SEEK +/- The local seek mode is on during automatic tuning. NO DEV (No Device) USB is selected as source without a USB device connected. A USB device or a USB cable has been disconnected during playback. t Be sure to connect a USB device and USB cable. NO MUSIC The USB device does not contain a music file. t Connect a USB device with a music file in it. NO NAME A album/artist/track name is not written in the track. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. OVERLOAD USB device is overloaded. t Disconnect the USB device, then change the source by pressing (SOURCE/OFF). t Indicates that the USB device is out of order, or an unsupported device is connected. READ The unit is reading all track and album information on the USB device. t Wait until reading is complete and playback starts automatically. RESET USB device cannot be operated due to a problem. t Press the RESET button (page 6). USB NO SUPRT (USB Not Support) The connected USB device is not supported. t For details on the compatibility of your USB device, visit the support site. " " or " " During reverse or fast-forward, you have reached the beginning or the end of the USB device and you cannot go any further. "" The character cannot be displayed with the unit. If these solutions do not help improve the situation, consult your nearest Sony dealer. 26