Sony DVP-CX875P Operating Instructions - Page 72
TV Virtual Surround Settings (TVS), DOLBY DIGITAL
View all Sony DVP-CX875P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Current audio format* 1 2 3 ALL 1 2 ( 2 7 ) 1 8 ( 3 4 ) T 1:32:55 1: ENGLISH PLAY DVD PROGRAM FORMAT DOLBY DIGITAL 3/2.1 L CR LFE LS RS Currently playing program format** * "PCM," "DTS," or "DOLBY DIGITAL" is displayed. In the case of "DOLBY DIGITAL," the channels in the playing track are displayed by numbers as follows: For Dolby Digital 5.1 ch: Rear component 2 TV Virtual Surround Settings (TVS) When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. DOLBY DIGITAL 3 / 2 . 1 Front component 2 + Center component 1 LFE (Low Frequency Effect) component 1 **The letters in the program format display mean the following sound component: L: Front (left) R: Front (right) C: Center LS: Rear (left) RS: Rear (right) S: Rear (monaural): The rear component of the Dolby Surround processed signal and the Dolby Digital signal LFE: Low Frequency Effect signal z Hint For Dolby Digital and DTS, "LFE" is always enclosed in a solid line regardless of the LFE signal component being output. Note If "DTS" is set to "OFF" in "AUDIO SETUP" (page 95), the DTS track selection option will not appear on the screen even if the disc contains DTS tracks. 1 Press SURROUND during playback. The following display appears. TVS DYNAMIC 2 Press SURROUND repeatedly to select one of the TVS sounds. Refer to the following explanations given for each item. • TVS DYNAMIC • TVS WIDE • TVS NIGHT • TVS STANDARD 72