Sony EVID90 User Manual (EVI-D80/D90 User Manual) - Page 16

Mode Condition, Basic settings

Get Sony EVID90 PDF manuals and user guides View all Sony EVID90 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Mode Condition Basic settings Mode Power On Command Power Off1) IFC2) Address Set Yes Yes IF_Clear Yes Yes CAM_Power On Yes No CAM_Power Off Yes No IR_Receive On/Off No No IR_ReceiveReturn On/Off No No CAM_Versionq Yes Yes CAM_PowerInq Yes Yes BlockInquiry No No InquiryCommand (and similar commands) No No Initializing3) Yes Yes No No No No Yes5) Yes No No During displaying the menu Yes Yes Yes Yes Yes4) 6) Yes6) Yes Yes Yes6) Yes6) Memory Command Yes Yes No No No No Yes Yes No No 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) The camera does not receive the operation sent from the Remote Commander. 5) Commands can be executed after the pan/tilt movement has been started. Before that, camera movement may be inconsistent. 6) When the menu display is updating, operation is not possible. Basic Functions 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
16
Basic Functions
Mode Condition
Basic settings
Mode
Power On
Power Off
1)
IFC
2)
Initializing
3)
During displaying the menu
Memory
Command
Command
Address Set
Yes
Yes
Yes
Yes
Yes
IF_Clear
Yes
Yes
Yes
Yes
Yes
CAM_Power On
Yes
No
No
Yes
No
CAM_Power Off
Yes
No
No
Yes
No
IR_Receive On/Off
No
No
No
Yes
4) 6)
No
IR_ReceiveReturn On/Off
No
No
No
Yes
6)
No
CAM_Versionq
Yes
Yes
Yes
5)
Yes
Yes
CAM_PowerInq
Yes
Yes
Yes
Yes
Yes
BlockInquiry
No
No
No
Yes
6)
No
InquiryCommand (and similar commands)
No
No
No
Yes
6)
No
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation
and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.
4) The camera does not receive the operation sent from the Remote Commander.
5) Commands can be executed after the pan/tilt movement has been started. Before that, camera movement may be inconsistent.
6) When the menu display is updating, operation is not possible.