Sony EVID90 User Manual (EVI-D80/D90 User Manual) - Page 31
EVI-D80N/D80P/D90N/D90P Command List 3/3
View all Sony EVID90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Command List EVI-D80N/D80P/D90N/D90P Command List (3/3) Command Set CAM_PictureEffect CAM_ICR 5) CAM_AutoICR 5) CAM_Memory CAM_IDWrite SYS_Menu IR_Receive IR_ReceiveReturn Information Display Pan-tiltDrive Pan-tiltLimitSet Command Off Neg.Art B&W On Off On Off Threshold Reset 3) 6) Set 3) 6) Recall 3) 4) Off On Off On/Off On Off On Off Up 3) Down 3) Left 3) Right 3) UpLeft 3) UpRight 3) DownLeft 3) DownRight 3) Stop 3) AbsolutePosition RelativePosition Home Reset LimitSet LimitClear Command Packet 8x 01 04 63 00 FF 8x 01 04 63 02 FF 8x 01 04 63 04 FF 8x 01 04 01 02 FF 8x 01 04 01 03 FF 8x 01 04 51 02 FF 8x 01 04 51 03 FF 8x 01 04 21 00 00 0p 0q FF 8x 01 04 3F 00 0p FF 8x 01 04 3F 01 0p FF 8x 01 04 3F 02 0p FF 8x 01 04 22 0p 0q 0r 0s FF 8x 01 06 06 03 FF 8x 01 06 08 02 FF 8x 01 06 08 03 FF 8x 01 06 08 10 FF 8x 01 7D 01 03 00 00 FF 8x 01 7D 01 13 00 00 FF 8x 01 7E 01 18 02 FF 8x 01 7E 01 18 03 FF 8x 01 06 01 VV WW 03 01 FF 8x 01 06 01 VV WW 03 02 FF 8x 01 06 01 VV WW 01 03 FF 8x 01 06 01 VV WW 02 03 FF 8x 01 06 01 VV WW 01 01 FF 8x 01 06 01 VV WW 02 01 FF 8x 01 06 01 VV WW 01 02 FF 8x 01 06 01 VV WW 02 02 FF 8x 01 06 01 VV WW 03 03 FF 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 03 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 04 FF 8x 01 06 05 FF 8x 01 06 07 00 0W 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 07 01 0W 07 0F 0F 0F 07 0F 0F 0F FF Comments Picture Effect Setting Infrared Mode ON/OFF Auto dark-field mode On/Off pq: ICR ON → OFF Threshold Level p: Memory Number (=0 to 5) Corresponds to 1 to 6 on the Remote Commander. pqrs: Camera ID (=0000 to FFFF) Turns off the menu screen. IR(remote commander) receive ON/OFF IR (remote commander) receive message via the VISCA communication ON/OFF For contents of messages, see page 33. ON/OFF of the Operation status display of One Push Trigger of CAM_Memory and CAM_WB VV: Pan speed 01 to 18 WW: Tilt Speed 01 to 17 YYYY: Pan Position E1E5 to 1E1B (center 0000) ZZZZ: T ilt Position FC75 to 0FF0 (IMAGE FLIP: OFF) (center 0000) Tilt Position F010 to 038B (IMAGE FLIP: ON) (center 0000) See page 42 W: 1 UpRight YYYY: Pan Limit Position 0001 to 1E1B ZZZZ: Tilt Limit Position 0001 to 0FF0 (Image Flip: OFF) Tilt Limit Position 0001 to 038B (Image Flip: ON) W: 0 DownLeft YYYY: Pan Limit Position E1E5 to FFFF ZZZZ: T ilt Limit Position FC75 to FFFF (IMAGE FLIP: OFF) Tilt Limit Position F010 to FFFF (IMAGE FLIP: ON) 1) After an ACK to a One Push White Balance Trigger is sent until the operation is completed, "Not Executable" is sent as a reply when any other commands are received. 2) Bright can be set only in Full Auto mode or Shutter Priority mode. 3) When the menu is displayed, this operation is ignored. 4) When other commands are received after a Completion notification for the Recall command is sent, "Command not executable" may be returned for a maximum of 240 msec due to internal processing. In this case, please transmit the command again. 5) The command is available on EVI-D90N/P only. 6) If Information Display is set to ON, the next command action may be delayed due to Operation status display internal processing after these commands are executed. 31