Sony EVID90 User Manual (EVI-D80/D90 User Manual) - Page 46

D70 Mode Pan/tilt position Pan position Cameras Parameters EVI-D70/P F725h (-170 degrees) to 08DBh (+170 degrees) EVI-D80N/D80P/D90N/ E1E5h (-170 degrees) to 1E1Bh (+170 degrees) D90P Tilt position Cameras Parameters EVI-D70/P FE70h (-30 degrees) to 04B0h (+90 degrees) EVI-D80N/D80P/D90N/ FC75h (-20 degrees) to 0FF0 (+90 degrees) D90P Translation of commands Accepting parameters Pan position Tilt position Translation Multiplies received parameters by 17/5 Multiplies received parameters by 17/5 Example When you execute the Relative position command 100 times, one step after another to turn the camera to the right side: Cameras EVI-D70/P EVI-D80N/D80P/D90N/ D90P whose D70 mode is ON Results Turns to the right side by 7.5 degrees. Turns to the right side by 6.6 degrees. For Absolute Position commands, the permissible range for drive settings are the same as those for the EVI-D70/P. Pan direction: -170 degrees to + 170 degrees. Tilt direction: -20 degrees to + 90 degrees. D70 D80N/D80P/D90N/D90P Pan/Tilt Pan Tilt F725h  E1E5h - ... ... - FEF5h  FC75h FC75h ... ... ... FFFDh  FFF6h FFF6h FFFEh  FFFAh FFFAh FFFFh  FFFDh FFFDh 0000h  0000h 0000h 0001h  0003h 0003h 0002h  0006h 0006h 0003h  000Ah 000Ah 0004h  000Dh 000Dh 0005h  0011h 0011h 0006h  0014h 0014h 0007h  0017h 0017h 0008h  001Bh 001Bh 0009h  001Eh 001Eh 000Ah  0022h 0022h 000Bh  0025h 0025h ... ... - 04B0h  0FF0h 0FF0h ... ... - 08DBh  1E1Bh - Translation when answering inquiry commands The camera sends back values that are calculated by inverse conversion performed when the camera accepts commands. Note Repetitive use of the Absolute position command may increase the variance that is accumulated from translation. 46