Sony EVID90 User Manual (EVI-D80/D90 User Manual) - Page 17
Zoom/Focus, White Balance
View all Sony EVID90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Zoom/Focus Mode Command CAM_Zoom Tele/Wide/Stop [VISCA] CAM_Zoom Tele/Wide/Stop [RC] CAM_Zoom Direct D-Zoom Limit CAM_Focus Far/Near/Stop [VISCA] CAM_Focus Far/Near/Stop [RC] CAM_Focus Direct CAM_Focus Mode (Auto/Manual) CAM_Focus One Push Trigger CAM_Focus Infinity CAM_Focus Near Limit AF Sensitivity Normal/Low AF Mode Norm/Interval/Zoom AF Activation Time/Interval Setting Power Off1) No No No No No No No No No No No No No No Power On IFC2) Initializing3) Zoom Direct Focus Direct AF ON During displaying the menu Memory Recall No No No Yes Yes Yes4) No No No No Yes Yes Yes4) No No No Yes Yes Yes Yes4) No No No No Yes Yes Yes4) No No No Yes No No Yes4) No No No Yes No No Yes4) No No No Yes Yes No Yes4) No No No Yes No Yes Yes4) No No No Yes No No Yes4) No No No Yes No Yes Yes4) No No No Yes No Yes Yes4) No No No Yes Yes Yes Yes4) No No No Yes Yes Yes Yes4) No No No Yes Yes Yes Yes4) No 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) When the menu display is updating, operation is not possible. White Balance Command CAM_WB Auto/Indoor/Outdoor/ OnePhshWB/Manual CAM_WB One Push Trigger CAM_WB R(B) Gain Reset/Up/Down/Direct Mode Power Off1) No No No IFC2) No No No Initializing3) No No No Auto Yes No No Power On White balance mode Indoor Outdoor One Push Yes Yes Yes No No Yes5) No No No Manual Yes No Yes During displaying the menu Memory Recall Yes4) No Yes4) No Yes4) No 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) When the menu display is updating, operation is not possible. 5) Commands are ignored during a One Push AWB operation. Basic Functions 17