Sony HDR-XR150 Handycam® Handbook - Page 83
Horizontal stripes appear on the images., fast appear crooked.
UPC - 027242788787
View all Sony HDR-XR150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
The camcorder stops operating. The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. If you keep applying vibration on the camcorder, recording may stop. There is a time difference between the point when START/STOP is pressed and the point that the recording movie is started or stopped actually. On your camcorder, there may be a slight time difference between the point where you press START/STOP and the actual point that recording movie starts/stops. This is not a malfunction. The horizontal to vertical ratio of the movie (16:9 (wide)/4:3) cannot be changed. The horizontal to vertical ratio of high definition image quality (HD) movies is 16:9 (wide). The auto focus does not function. Set [FOCUS] to [AUTO] (p. 66). The recording conditions are not suitable for auto focus. Adjust the focus manually (p. 66). SteadyShot does not function. Set [ STEADYSHOT] to [ACTIVE] or [STANDARD] (p. 68). Even if [ STEADYSHOT] is set to [ACTIVE] or [STANDARD], your camcorder may not be able to compensate for excessive vibrations. The subjects passing by the screen very fast appear crooked. This is called the focal plane phenomenon. This is not a malfunction. Because of the way the image device (CMOS sensor) reads out image signals, the subjects passing by the lens rapidly might appear crooked depending on the recording conditions. Horizontal stripes appear on the images. This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. This is not a malfunction. Black bands appear when you record a TV screen or computer screen. Set [ STEADYSHOT] to [OFF] (p. 68). [LCD BL LEVEL] cannot be adjusted. You cannot adjust [LCD BL LEVEL] when: The LCD panel is closed on your camcorder with the LCD screen facing out. The power is supplied from the AC Adaptor. Magnification changes when the recording mode is switched. You cannot use digital zoom when your camcorder is in the photo recording mode. Playback Images cannot be played back. Select the type of recording media you want to play back (p. 17). (HDR-CX150/XR150) Select the image quality of the movie you want to play back (p. 26). Images recorded on other devices may not be played back. This is not a malfunction. Additional information US 83