Sony HDR XR200E Handbook - Page 38
Switching the screen display, or turning the LCD backlight on/off
UPC - 411378077257
View all Sony HDR XR200E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Table of Contents Useful Recording Techniques [TIMING] Select the recording start point after START/STOP is pressed. The default setting is [3sec AFTER]. [3sec AFTER] 3sec BEFORE] Notes You cannot record sound with [SMTH SLW REC]. Image quality of [SMTH SLW REC] is not as good as that of normal recording. Switching the screen display, or turning the LCD backlight on/off Each time you press DISP, the screen indicators, such as remaining battery power, etc., turn on or off. To turn off the LCD backlight, press and hold DISP down for a few seconds until appears. This setting is practical when you use your camcorder in bright conditions or you want to save battery power. The recorded image will not be affected by the setting. To turn on the LCD backlight, press and hold DISP down for a few seconds until disappears. Acquiring location information (GPS) (HDR-XR200VE) Set the GPS switch to ON ( appears on the LCD screen). Your camcorder starts trying to triangulate. When your camcorder triangulates successfully, it will record the location information at the time movies and photos were recorded. The movies and photos with location information will appear on a map (p. 43), so that you 38 Index