Sony HT-SF360 Operating Instructions
Sony HT-SF360 - Blu-ray Disc™ Matching Component Home Theater System Manual
 |
View all Sony HT-SF360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony HT-SF360 manual content summary:
- Sony HT-SF360 | Operating Instructions - Page 1
4-130-033-13(1) Home Theatre System Operating Instructions HT-SF360 ©2009 Sony Corporation - Sony HT-SF360 | Operating Instructions - Page 2
prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. For customers in the United States, Canada and Mexico This symbol is intended to alert the user to the presence of the Hot Surface that may be hot if it is touched during the - Sony HT-SF360 | Operating Instructions - Page 3
or modifications not expressly approved in this manual could void your authority to operate this equipment. To reduce the risk of electric shock, the speaker cord should be connected to the apparatus and the speakers in accordance with the following instructions. 1) Disconnect the AC power cord from - Sony HT-SF360 | Operating Instructions - Page 4
The HT-SF360 consists of: • Receiver • Speaker systema) - Front speaker - Center speaker - Surround speaker - Subwoofer STR-KS360S SS-MSP36F SS-CNP36 SS-SRP36F SS-WP36 a) Be sure to use only the supplied speakers. • The instructions in this manual describe the controls on the supplied remote. You - Sony HT-SF360 | Operating Instructions - Page 5
the receiver and the remote..... 21 7: Calibrating the appropriate settings automatically (AUTO CALIBRATION 22 8: Adjusting the speaker levels (TEST TONE TV sound from the speakers connected to the receiver (System Audio Control 48 Turning off the receiver with the TV (System Power Off 49 Using - Sony HT-SF360 | Operating Instructions - Page 6
B ACTIVE STANDBY lamp C Display D White lamp E Remote sensor F MASTER VOLUME G INPUT SELECTOR Function Press to turn the receiver on or off (page 21, 29, 30). Lights up in amber when the Control for HDMI and/or S-AIR standby mode are set to on and the receiver is on standby mode. Note If the ACTIVE - Sony HT-SF360 | Operating Instructions - Page 7
made digital connections. Lights up when the S-AIR transmitter (not supplied) is connected. Name F HDMI G Preset station indicators H Tuner indicators I COAX J OPT K PL/ PLII L DTS M SW Function Lights up when a playback component is connected to this receiver using an HDMI jack (page 18). Lights - Sony HT-SF360 | Operating Instructions - Page 8
SPEAKERS section Connects to the supplied speakers and subwoofer (page 15). B S-AIR (EZW-T100) With slot cover CAUTION Please do not remove the slot cover until you want to install the wireless transmitter. slot Connects to a wireless a TV or/and speakers connected to this receiver (page 18). - Sony HT-SF360 | Operating Instructions - Page 9
commander You can use the supplied remote RM-AAU057 to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate (page 60). RM-AAU057 ws wa w; ql qk qj qh qg TV ?/1 TV INPUT DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA - Sony HT-SF360 | Operating Instructions - Page 10
you connect a Sony TV which is compatible with the THEATER button. Also, the audio is automatically switched to the audio output of this receiver when you connect the TV and the receiver with HDMI connection, and the Control for HDMI function is set to on. Press to display the guide when you are - Sony HT-SF360 | Operating Instructions - Page 11
picture modes of the TV. V TV INPUT Press to select input. To control the DVD recorder/Blu-ray Disc recorder Remote Button Function D F1 Press to select the HDD. F2 Press to select the Blu-ray Disc/DVD. M MENU/HOME Press to display the menu. N. Press to skip chapters. REPLAY < Press to - Sony HT-SF360 | Operating Instructions - Page 12
the highlight (cursor) and selects the item. Press to display the top menu or disc menu. To control the SAT Remote Button Function F GUIDE Press to display the guide menu. M MENU/HOME Press to display the menu. Q , V/v/B/b Press to select a menu item and enters the selection. * The number - Sony HT-SF360 | Operating Instructions - Page 13
Getting Started Getting Started 1: Installing the speakers This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound, be sure to connect all the speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer - Sony HT-SF360 | Operating Instructions - Page 14
regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. • If you install the speakers on the wall, you do not need to attach the supplied - Sony HT-SF360 | Operating Instructions - Page 15
, be sure to match the colored connector to the speaker jack on the receiver: Connector Red White Grey Blue Green Purple Speaker jack FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER To connect the speakers correctly Check the speaker type by referring to the speaker label* at the rear panel of the - Sony HT-SF360 | Operating Instructions - Page 16
output the sound of the TV from the speakers connected to the receiver, be sure to - connect the audio output jacks of the TV C HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. Notes • Be sure to turn on the receiver when the video and audio signals of a playback component are being - Sony HT-SF360 | Operating Instructions - Page 17
hook up your components This section describes how to hook up your components to this receiver. Before you begin, refer to "Component to be connected" below for the pages MEDIA PORT adapter. For details, refer to the operating instructions supplied with the DIGITAL MEDIA PORT adapter. continued 17US - Sony HT-SF360 | Operating Instructions - Page 18
and audio signals in digital format. Sony recommends that you connect components to the receiver using an HDMI cable. With HDMI speakers connected to the receiver. This signal supports Dolby Digital, DTS and Linear PCM. • This receiver supports xvYCC transmission. • This receiver supports the Control - Sony HT-SF360 | Operating Instructions - Page 19
remote so that you can use the button to control your DVD player. For details, see "Changing the input button assignments" (page 60). b)Connect at least one of the audio cords (B or C). Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the SPEAKERS specification - Sony HT-SF360 | Operating Instructions - Page 20
. • You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR. Tips • To output the sound of the TV from the speakers connected to the receiver, be sure to - connect the audio output jacks of the TV to - Sony HT-SF360 | Operating Instructions - Page 21
supplied) AM loop antenna (supplied) 6: Preparing the receiver and the remote Connecting the AC power cord (mains lead) Connect SPEAKERS FRONT R FRONT L SUR R SUR L CENTER To the wall outlet Performing initial setup operations Before using the receiver for the first time, initialize the receiver - Sony HT-SF360 | Operating Instructions - Page 22
AA) batteries in the RM-AAU057 Remote Commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid the speaker levels manually according to your preference. For details, see "8: Adjusting the speaker levels (TEST TONE)" (page 27). - Sony HT-SF360 | Operating Instructions - Page 23
Doing so may damage the receiver and the microphone. • During the calibration, the sound that comes out of the speakers is very loud. The volume set to off automatically. • When you use the S-AIR product, disconnect the headphones. Example: SPEAKERS FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER - Sony HT-SF360 | Operating Instructions - Page 24
INPUT DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER BD/DVD TOP MENU MENU F1 F2 JUMP PICTURE WIDE FAVORITES THEATER 123 GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY AMP MENU 0 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL RETURN/EXIT MENU/HOME TV CH - TV CH - Sony HT-SF360 | Operating Instructions - Page 25
the optimizer microphone is out of the acceptable range. • The optimizer microphone or subwoofer may be damaged. Contact your Sony dealer or local authorized Sony service facility. ERROR F 33 The front speakers are not connected. Check that the front speakers are connected properly. ERROR SR 33 - Sony HT-SF360 | Operating Instructions - Page 26
WARN 41 WARN 42 The sound input from the optimizer microphone is out of the acceptable range. The distance between the optimizer microphone and the speakers is too closed. The distance between the optimizer microphone and the speakers is too closed. Set them away, and then try to perform the Auto - Sony HT-SF360 | Operating Instructions - Page 27
"T. TONE N", then press . 11Press AMP MENU. The AMP menu turns off. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. • The test tone signals are not output from the HDMI OUT jack. 27US Getting - Sony HT-SF360 | Operating Instructions - Page 28
DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER BD/DVD TOP MENU MENU F1 F2 JUMP PICTURE WIDE FAVORITES THEATER 123 GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY AMP MENU 0 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL RETURN/EXIT MENU/HOME Input buttons MUTING - Sony HT-SF360 | Operating Instructions - Page 29
sound/images from the components connected to the receiver Input buttons TV TV ?/1 TV INPUT DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER BD/DVD TOP MENU MENU F1 F2 JUMP PICTURE WIDE FAVORITES THEATER 123 GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY AMP MENU - Sony HT-SF360 | Operating Instructions - Page 30
details, refer to the operating instructions of the TV. 5 Play back the disc. 6 Adjust the volume. Tip Even if you playback Dolby True HD, Dolby Digital Plus or DTS-HD with a connected component compatible with these sound formats, the receiver accepts as Dolby Digital or DTS. When you connect the - Sony HT-SF360 | Operating Instructions - Page 31
Playback Enjoying a connected component through DMPORT connection 1 Press DMPORT. You can also use INPUT SELECTOR on the receiver to select "DMPORT". 2 Start playback of the connected component. Tip When listening to MP3 or other compressed music using a portable audio source, you can enhance - Sony HT-SF360 | Operating Instructions - Page 32
the amplifier menus, you can make various adjustments to customize the receiver. , V,v,B,b SOUND FIELD 789 AMP MENU 0 ENTER CLEAR DISPLAY TOOLS/ OPTIONS MUTING TV VOL MASTER VOL AMP MENU RETURN/EXIT MENU/HOME 1 Press AMP MENU. "SET HDMI" appears on the display. 2 Press V/v repeatedly - Sony HT-SF360 | Operating Instructions - Page 33
32. Menu [Display] HDMI settings [SET HDMI] (page 36) Auto Calibration settings [A.CAL] (page 36) Speaker settings [SP SETUP] (page 37) Parameters [Display] Settings Control for HDMIa)b) [CONTROL FOR HDMI] CTRL ON, CTRL OFF Volume limita) [VOL LIM] MAX, 39......1, MIN Power savea) [P.SAVE - Sony HT-SF360 | Operating Instructions - Page 34
page 38) Custom settings [CUSTOM] (page 39) Parameters [Display] Test tonea) [T. TONE] Front left speaker levela) [FL LVL] Center speaker level [CNT LVL] Front right speaker level [FR LVL] Surround right speaker level [SR LVL] Surround left speaker level [SL LVL] Subwoofer level [SW LVL] Bass level - Sony HT-SF360 | Operating Instructions - Page 35
, refer to the page in the parentheses. b)"CONTROL FOR HDMI" scroll across the display, then "CONTROL" appears. c)The initial setting for the model of AIR transmitter (not supplied) is inserted to the EZW-T100 slot on the receiver. h)This parameter is only available when using the EZW-T100A wireless - Sony HT-SF360 | Operating Instructions - Page 36
x VOL LIM (Volume limit) Lets you set the volume limit of your receiver. For details, see "Using the Volume Limit function" (page 49). x P.SAVE (Power Save) Lets you save the power consumption during power standby mode while Control for HDMI function is set to on. For details, see "Using the Power - Sony HT-SF360 | Operating Instructions - Page 37
(SP SETUP menu) You can use the SP SETUP menu to set the distance of the speakers connected to this receiver. Select "SP SETUP" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 32) and "Overview of the menus" (page - Sony HT-SF360 | Operating Instructions - Page 38
position. For details, see "8: Adjusting the speaker levels (TEST TONE)" (page 27). x FL LVL (Front left speaker level) x CNT LVL (Center speaker level) x FR LVL (Front right speaker level) x SR LVL (Surround right speaker level) x SL LVL (Surround left speaker level) x SW LVL (Subwoofer level - Sony HT-SF360 | Operating Instructions - Page 39
the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. x A/V . • This function is useful only for Dolby Digital, DTS and Linear PCM (2ch) input by optical and coaxial receiver automatically. For details, see "Using the Sleep Timer (SLEEP)" ( - Sony HT-SF360 | Operating Instructions - Page 40
. For details, see "Switching the audio input mode (IN MODE)" (page 52). This parameter is only available when SAT input is selected. Settings for the S-AIR (S-AIR menu) For details on S-AIR, see "Using an S-AIR Product" (page 53). 40US - Sony HT-SF360 | Operating Instructions - Page 41
receiver's preprogrammed sound fields. GUIDE surround effects. However, this receiver will generate a low frequency to 2 or more speakers. Performs Dolby Pro system reproduces the sound characteristics of the Sony Pictures Entertainment "Cary Grant Theater channels. HEADPHONE THEATER Output the sound - Sony HT-SF360 | Operating Instructions - Page 42
PCM signals are received via an HDMI IN jack. • The sound is not output from multiple speakers depending on the while using the S-AIR receiver (not supplied), sound from the S-AIR receiver (not supplied) may F1 F2 JUMP PICTURE WIDE FAVORITES THEATER 123 GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY - Sony HT-SF360 | Operating Instructions - Page 43
received. To stop the automatic tuning manually, press TUNING + or -. If an FM program is noisy If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. 1 Press MENU/HOME WIDE FAVORITES THEATER 123 GUIDE 456 SOUND FIELD 789 CLEAR - Sony HT-SF360 | Operating Instructions - Page 44
1 Press TUNER/BAND repeatedly until "AM" appears in the display. 2 Press MENU/HOME. 3 Press V/v repeatedly until "AM STEP" appears in the display, then press or preset station you want. Each time you press the button, the receiver tunes in one preset station. You can also press the numeric buttons - Sony HT-SF360 | Operating Instructions - Page 45
. 8 Press MENU/HOME. Viewing the station name or frequency in the display When the receiver is set to "FM System Audio Control setting is set to on. • System Audio Control: While watching TV, you can select to output the sound from the TV speaker or the speakers connected to the receiver. • System - Sony HT-SF360 | Operating Instructions - Page 46
may not work. Refer to the operating instructions of the component. Preparing for the "BRAVIA" Sync To use the "BRAVIA" Sync, set the Control for HDMI function to on for both the receiver and the connected component. The receiver is compatible with the "Control for HDMI-Easy Setting" function. When - Sony HT-SF360 | Operating Instructions - Page 47
on setting the TV and connected components, refer to the operating instructions of the respective components. Notes • You cannot perform One-Touch Play and System Audio Control during Control for HDMI-Easy Setting operation. • Before you do the Control for HDMI-Easy Setting from the TV, be sure to - Sony HT-SF360 | Operating Instructions - Page 48
the receiver (System Audio Control) You can enjoy the TV sound from the speakers connected to the receiver by a simple operation. You can operate System Audio Control function using the TV menu. For details, refer to the operating instructions supplied with the TV. When System Audio Control function - Sony HT-SF360 | Operating Instructions - Page 49
off automatically. You can also use the receiver's remote to turn off the TV. TV ?/1 TV INPUT DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER BD/DVD TOP MENU MENU F1 F2 JUMP PICTURE WIDE FAVORITES THEATER 123 GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY AMP MENU - Sony HT-SF360 | Operating Instructions - Page 50
receiver during active standby mode if the TV is turned off and HDMI signal transmission is stopped. , V,v,B,b GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY AMP MENU 0 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL RETURN/EXIT MENU/HOME only when the Control for HDMI function is set to on. 50US - Sony HT-SF360 | Operating Instructions - Page 51
V/v repeatedly to change the display setting, then press . • DSPL ON: The display appears all the time. • DSPL OFF: The display appears when you operate the receiver. 5 Press AMP MENU. The AMP menu turns off. Other Operations 51US - Sony HT-SF360 | Operating Instructions - Page 52
audio input mode setting when you connect satellite tuner or set-top box to both HDMI IN jack and optical digital input jack on the receiver and SAT input has been selected. 1 Press AMP MENU. "SET HDMI" appears on the display. 2 Press V/v repeatedly to select "CUSTOM". 3 Press menu. or b to - Sony HT-SF360 | Operating Instructions - Page 53
speaker sound wirelessly. - S-AIR receiver: You can enjoy system sound in another room. These S-AIR products can be purchased as an option (the S-AIR products lineup differs depending on the area). Notes or instruction from the surround amplifier or S-AIR receiver in this operating instructions - Sony HT-SF360 | Operating Instructions - Page 54
the wireless transmitter. To insert the wireless transceiver into the S-AIR sub unit For details on installing the wireless transceiver into the surround amplifier and S-AIR receiver, refer to the operating instructions supplied with the surround amplifier and S-AIR receiver. Wireless transmitter - Sony HT-SF360 | Operating Instructions - Page 55
and S-AIR receiver. Sound transmission is established as follows (example): S-AIR main unit ?/1 ACTIVE STANDBY INPUT SELECTOR MASTER VOLUME ID A Other S-AIR main unit ID B ID A ID A S-AIR sub unit S-AIR sub unit ID B S-AIR sub unit Pairing the S-AIR main unit with a specific S-AIR sub - Sony HT-SF360 | Operating Instructions - Page 56
sub unit. x For the surround amplifier Refer to the operating instructions supplied with the surround amplifier. x For the S-AIR receiver Refer to the operating instructions supplied with the S-AIR receiver. 10 Pairing completed. "COMPLETE" appears in the display. To exit the menu Press AMP MENU - Sony HT-SF360 | Operating Instructions - Page 57
receiver. The S-AIR receiver can be placed in another room for enjoying the system's sound there. For details of the S-AIR receiver, refer to the operating instructions supplied with the S-AIR receiver. Note Sources with copyright protection may not be playable on S-AIR products. , V,v,B,b GUIDE - Sony HT-SF360 | Operating Instructions - Page 58
S-AIR receiver. AIR products or other wireless systems may be unstable. In this case, the transmission may be improved by changing the following "RF CHNG" setting. , V,v,B,b GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY AMP MENU 0 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL RETURN/EXIT MENU/HOME - Sony HT-SF360 | Operating Instructions - Page 59
channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). Changing the RF output power (For EZW-T100A wireless transceiver only) 1 Press AMP MENU. 2 Press V/v repeatedly to select "S-AIR". 3 Press menu. or b to enter - Sony HT-SF360 | Operating Instructions - Page 60
input buttons to suit the components in your system. For example, if you connect a Blu-ray Disc player to the DVD jack on the receiver, you can set the DVD button on this remote to control the Blu-ray Disc player. Notes • You can change the remote assignments for BD, DVD and SAT input buttons - Sony HT-SF360 | Operating Instructions - Page 61
and DMPORT at the same time. The remote is reset to its factory settings. Additional Information Glossary x Digital Cinema Sound (DCS) A unique sound reproduction technology for home theater developed by Sony, in cooperation with Sony Pictures Entertainment, for enjoying the exciting and powerful - Sony HT-SF360 | Operating Instructions - Page 62
and sound. The HDMI specification supports HDCP (High-bandwidth DTS, etc. By adding a deep bass with a frequency between 20 to 120 Hz, audio becomes more powerful. x S-AIR (Sony wireless LANs and Bluetooth applications. x S-master S-master is an all-digital amplifier technology developed by Sony - Sony HT-SF360 | Operating Instructions - Page 63
a qualified service shop. On heat buildup Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver at a receiver. If you encounter color irregularity on a nearby TV screen The center speaker is magnetically shielded to allow it to be installed - Sony HT-SF360 | Operating Instructions - Page 64
benzine. If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Audio There is no sound, no - Sony HT-SF360 | Operating Instructions - Page 65
severe hum or noise. • Check that the speakers and components are connected securely. • Check There is pop noise from a specific component connected to this receiver when you turn on the or DTS multi channel sound is not reproduced. • to make sure it supports this receiver. Video There is no - Sony HT-SF360 | Operating Instructions - Page 66
Refer to the operating instructions supplied with each component. The source image input to the HDMI jack on the receiver is not output from from the receiver and TV speaker while using the System Audio Control function. • Make sure the TV is compatible with the System Audio Control function. • - Sony HT-SF360 | Operating Instructions - Page 67
oven. • Place the S-AIR main unit and S-AIR sub unit separately from other wireless devices. • Avoid using any other wireless devices. • Change the "RF CHNG" setting (page 58). • Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit. • Turn off the receiver and S-AIR sub unit, then - Sony HT-SF360 | Operating Instructions - Page 68
settings on the receiver. If the problem persist Consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with S-AIR function, have a Sony dealer check the entire system together (S-AIR main unit and - Sony HT-SF360 | Operating Instructions - Page 69
AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code UC only) AC, 60 Hz MX 127 V AC, 60 Hz 2)Reference power output for front, center, surround speakers and subwoofer. Depending on the sound field settings and the source, there may be no sound output. - Sony HT-SF360 | Operating Instructions - Page 70
When Control for HDMI and S-AIR standby are off) Dimensions (w/h/d) (Approx.) 17 × 2 5/8 × 13 1/8 inches (430 × 66.5 × 333 mm) including projecting parts and controls Mass (Approx.) 3.4 kg (7 lb 8 oz) Speaker section • Front speaker (SS-MSP36F) • Surround speaker (SS-SRP36F) • Center speaker (SS - Sony HT-SF360 | Operating Instructions - Page 71
Supplied speakers Front speaker (2) Center speaker (1) Surround speaker (2) Subwoofer (1) Supplied accessories Operating Instructions (this manual) Quick Setup Guide (1) Speaker Stand Installation Guide (1) FM wire antenna (1) AM loop antenna (1) Remote commander • RM-AAU057 (1) R6 (size-AA) - Sony HT-SF360 | Operating Instructions - Page 72
PAIRING 55 Power Save 50 R Remote commander 9 S S-AIR 53 Satellite tuner/Set-top box connecting 18 enjoying 29 Selecting component 28 Sleep Timer 52 Speakers connecting 15 Super Audio CD player connecting 17 playback 30 System Audio Control 48 System Power Off 49 T TEST TONE 26 Tuner connecting 21
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
©2009 Sony Corporation
4-130-033-
13
(1)
Home Theatre
System
Operating Instructions
HT-SF360