Sony HT-SF360 Operating Instructions - Page 20

Connecting video components The following illustration shows how to connect video components such as DVD player, DVD recorder, VCR, etc. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. DVD recorder, DVD player Audio signal Satellite tuner, Set-top box Audio signal B C L L DIGITAL TV ANTENNA R R AUTO AUDIO IN AUDIO IN AUDIO IN COAX IN CAL MIC VIDEO 1 TV SA-CD/CD VIDEO 2 DC5V 700mA MAX HDMI DMPORT BD IN DVD IN OPT IN SAT OPT IN SAT IN AM OUT Notes • To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. • Be sure to connect the video output of the DVD player, DVD recorder and VCR to the TV, so that the image is displayed on the TV. Refer to the operating instructions of each connected component for details. • You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR. Tips • To output the sound of the TV from the speakers connected to the receiver, be sure to - connect the audio output jacks of the TV to the TV IN jacks of the receiver. - turn off the TV's volume or activate the TV's muting function. • All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. A Audio signal VCR A Audio cord (not supplied) B Coaxial digital cord (not supplied) C Optical digital cord (not supplied) 20US