Sony HT-SF360 Operating Instructions - Page 23

Before you perform Auto, Calibration, Connect the supplied optimizer, microphone to the AUTO CAL - s air

Get Sony HT-SF360 - Blu-ray Disc™ Matching Component Home Theater System PDF manuals and user guides View all Sony HT-SF360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Getting Started Before you perform Auto Calibration Before you perform the Auto Calibration, set up and connect the speakers (page 13, 15). • The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect other microphones to this jack. Doing so may damage the receiver and the microphone. • During the calibration, the sound that comes out of the speakers is very loud. The volume of the sound cannot be adjusted. Pay attention to the presence of children or to the effect on your neighborhood. • Perform the Auto Calibration in a quiet environment to avoid the effect of noise and to get a more accurate measurement. • If there are any obstacles in the path between the optimizer microphone and the speakers, the calibration cannot be performed correctly. Remove any obstacles from the measurement area to avoid measurement error. Notes • If the muting function has been activated before you perform Auto Calibration, the muting function will be set to off automatically. • When you use the S-AIR product, disconnect the headphones. Example: SPEAKERS FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER L L DIGITAL TV EZW-T100 R R AUTO AUDIO IN AUDIO IN AUDIO IN CAL MIC VIDEO 1 TV SA-CD/CD COAX IN VIDEO 2 DC5V 700mA MAX HDMI DMPORT BD IN DVD IN OPT IN SAT OPT IN SAT IN ANTENNA AM OUT Optimizer microphone 1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2 Set up the optimizer microphone. Place the optimizer microphone at your listening position.You can also use a stool or tripod so that the optimizer microphone remains at the same height as your ears. Tip When you face the speaker towards the optimizer microphone, you will get a more accurate measurement. 23US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
23
US
Getting Started
Before you perform the Auto Calibration, set
up and connect the speakers (page 13, 15).
•
The AUTO CAL MIC jack is used for the
supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.
•
During the calibration, the sound that comes
out of the speakers is very loud. The volume
of the sound cannot be adjusted. Pay
attention to the presence of children or to the
effect on your neighborhood.
•
Perform the Auto Calibration in a quiet
environment to avoid the effect of noise and
to get a more accurate measurement.
•
If there are any obstacles in the path between
the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.
Notes
• If the muting function has been activated before
you perform Auto Calibration, the muting function
will be set to off automatically.
•
When you use the S-AIR product, disconnect the
headphones.
Example:
1
Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack.
2
Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position.You can also use a stool
or tripod so that the optimizer
microphone remains at the same height as
your ears.
Tip
When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.
Before you perform Auto
Calibration
Optimizer
microphone