Sony HT-SF360 Operating Instructions - Page 56

x Before pairing Sound transmission is established by the ID (example). Your room Neighbor S-AIR main unit ?/1 ACTIVE STANDBY INPUT SELECTOR MASTER VOLUME ID A ID A S-AIR sub unit ID A S-AIR sub unit x After pairing Sound transmission is established between the paired S-AIR main unit and S-AIR sub unit(s) only. Your room Neighbor S-AIR main unit ?/1 ACTIVE STANDBY INPUT SELECTOR MASTER VOLUME ID A No transmission ID A S-AIR sub unit ID A S-AIR sub unit Pairing 1 Place the S-AIR sub unit that you want to pair near the S-AIR main unit. Note Remove headphones from the surround amplifier (if connected). 2 Match the IDs of the S-AIR main unit and the S-AIR sub unit. • To set the ID of the S-AIR main unit, see "To set the ID of the S-AIR main unit" (page 55). • To set the ID of the S-AIR sub unit, refer to the operating instructions supplied with the S-AIR sub unit. 3 Press AMP MENU. 4 Press V/v repeatedly to select "S-AIR". 5 Press menu. or b to enter the 6 Press V/v repeatedly to select "PAIRING". 7 Press or b to enter the parameter. 8 Press V/v repeatedly to select the setting you want, then press . • START: The S-AIR main unit starts pairing. • CONDIN: you can check the current ID. When the pairing setting is timed out, "NO PAIR" appears in the display. 9 Start pairing of the S-AIR sub unit. x For the surround amplifier Refer to the operating instructions supplied with the surround amplifier. x For the S-AIR receiver Refer to the operating instructions supplied with the S-AIR receiver. 10 Pairing completed. "COMPLETE" appears in the display. To exit the menu Press AMP MENU. 56US