Sony HT-SF360 Operating Instructions - Page 59
Changing the RF output power, Enjoying the S-AIR receiver, while the S-AIR main unit is in, standby
View all Sony HT-SF360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
To exit the menu Press AMP MENU. Notes • When the wireless transmitter is not inserted in the S-AIR main unit, you cannot set "RF CHNG". • In most cases, you will not need to change this setting. • If "RF CHNG" is set to "RF OFF," transmission between the S-AIR main unit and S-AIR sub unit can be performed using one of the following channels. - S-AIR ID A: equivalent channel for IEEE 802.11b/g channel 1 - S-AIR ID B: equivalent channel for IEEE 802.11b/g channel 6 - S-AIR ID C: equivalent channel for IEEE 802.11b/g channel 11 • The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). Changing the RF output power (For EZW-T100A wireless transceiver only) 1 Press AMP MENU. 2 Press V/v repeatedly to select "S-AIR". 3 Press menu. or b to enter the 4 Press V/v repeatedly until "RF POWER" appears in the front panel display, then press or b. 5 Press V/v repeatedly to select the desired setting. • "HIGH": Normally select this. • "LOW": The RF output power is decreased. 6 Press . The setting is made. 7 Press AMP MENU. The receiver menu turns off. Enjoying the S-AIR receiver while the S-AIR main unit is in standby mode (For the S-AIR receiver only (not supplied)) You can enjoy the S-AIR receiver while the S-AIR main unit is in standby mode by setting "STBY" to "STBY ON". , V,v,B,b GUIDE 456 SOUND FIELD 789 CLEAR DISPLAY AMP MENU 0 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL AMP MENU RETURN/EXIT MENU/HOME TV CH - TV CH + PRESET - REPLAY ADVANCE PRESET + .< > < 1 Press AMP MENU. 2 Press V/v repeatedly to select "S-AIR". 3 Press menu. or b to enter the 4 Press V/v repeatedly to select "STBY". 5 Press or b to enter the parameter. 6 Press V/v repeatedly to select the setting you want, then press . • STBY OFF: You cannot enjoy the S-AIR receiver while the S-AIR main unit is in standby mode. • STBY ON: You can enjoy the S-AIR receiver while the S-AIR main unit is in standby mode or turned on. continued 59US Other Operations