Sony HT-SF360 Operating Instructions - Page 26
Clearing the measurement, result, When you select DIST or, LEVEL, When you have finished
![]() |
View all Sony HT-SF360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Warning code Explanation WARN 41 WARN 42 The sound input from the optimizer microphone is out of the acceptable range. The distance between the optimizer microphone and the speakers is too closed. The distance between the optimizer microphone and the speakers is too closed. Set them away, and then try to perform the Auto Calibration. WARN 43 The distance and position of a subwoofer cannot be detected. This may be caused by noise. Try to perform the Auto Calibration in a quiet environment. NO WARN There is no warning information. When you select "DIST" or "LEVEL" You can check the speaker distance or speaker level. When you have finished Disconnect the optimizer microphone from the receiver. Note If you have changed the position of the speakers, it is recommended that you perform Auto Calibration again in order to enjoy the surround sound. Clearing the measurement result You can delete the result of Auto Calibration. If there is no saved data, you cannot delete the result. 1 Press AMP MENU. 2 Press V/v repeatedly until "A.CAL" appears, then press or b. 3 Press V/v repeatedly to select "A.CAL CLR", then press or b. 4 Press V/v to select "YES", then press . The saved result is deleted. The settings for speaker distance and speaker level return to their defaults. 26US
![](/manual_guide/products/sony-htsf360-operating-instructions-0551d63/26.png)