Sony HT-SF360 Operating Instructions - Page 69

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code UC only) With 3 ohm loads, both channels driven, from 170 - 20,000 Hz; rated 84 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Models of area code UC Power Output1) Stereo mode (rated) 84 W + 84 W (3 ohms at 170 - 20,000 Hz, THD 1%) Surround mode (reference) RMS Output (3 ohms at 1 kHz, THD 10%) FRONT2): 143 W/ch CENTER2): 143 W SUR2): 143 W/ch (1.5 ohms at 70 Hz, THD 10%) SUBWOOFER2): 285 W Models of area code MX Power Output1) Stereo mode (rated) 90 W + 90 W (3 ohms at 1 kHz, THD 1%) Surround mode (reference) RMS Output (3 ohms at 1 kHz, THD 10%) FRONT2): 125 W/ch CENTER2): 125 W SUR2): 125 W/ch (1.5 ohms at 70 Hz, THD 10%) SUBWOOFER2): 210 W 1)Measured under the following conditions: Area code Power requirements UC 120 V AC, 60 Hz MX 127 V AC, 60 Hz 2)Reference power output for front, center, surround speakers and subwoofer. Depending on the sound field settings and the source, there may be no sound output. Inputs Analog Sensitivity: 1 V/50 kohms Digital (Coaxial) Impedance: 75 ohms Tone Gain levels ±10 dB, 0.5 dB step Reproduction frequency range: 28 - 20,000 Hz FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Area code Tuning scale 10 kHz step 9 kHz step UC, MX 530 - 531 - 1,710 kHz 1,710 kHz Antenna Loop antenna Intermediate frequency 450 kHz General Power requirements Area code Power requirements UC 120 V AC, 60 Hz MX 127 V AC, 60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5 V, 700 mA MAX Additional Information continued 69US