Sony HT-SF360 Operating Instructions - Page 14

Installing the speakers on the wall You can install your speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below. 4 mm (3/16 inch) more than 25 mm (more than 1 inch) 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hook on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude 7/32 to 9/32 inch. For the center speaker 160 mm (6 3/8 inches) 5 mm to 7 mm (7/32 to 9/32 inch) For the front speakers 5 mm to 7 mm (7/32 to 9/32 inch) 217 mm (8 5/8 inches) For the surround speakers 5 mm to 7 mm (7/32 to 9/32 inch) 100 mm (4 inches) 3 Hang the speakers on the screws. 4.6 mm (3/16 inch) 10 mm (13/32 inch) Rear of speaker Notes • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. • If you install the speakers on the wall, you do not need to attach the supplied speaker stand. 14US