Sony ICD-AX412 Operating Instructions - Page 44
Recording from other, equipment - instructions
UPC - 027242816428
View all Sony ICD-AX412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
If the input level is not strong enough, adjust the "Mic Sensitivity" setting on the IC recorder. When a plug in power type microphone is connected, power is automatically supplied to the microphone from the IC recorder. 5 Press x (stop) to stop recording. z Recommended microphones You can use the Sony ECM-CS10, ECM-CZ10, ECM-DS70P, ECM-DS30P electret condenser microphone (not supplied). To record sound from a telephone or a cell phone You can use the ECM-TL1 headphone-type electret condenser microphone (not supplied) to record sound from a telephone or a cell phone. For details on how to make the connection, refer to the operating instructions supplied with the ECM-TL1 microphone. P Notes • After you have made the connection, check the sound quality of the conversation and the recording level before you start recording. • If the beep of the telephone or a dial tone is recorded, the conversation may be recorded with lower level of sound. In this case, start recording after the conversation has started. • The VOR function (page 38) may not work, depending on the kind of telephone or the line condition. • We assume no responsibility whatsoever for any inconvenience, even if you cannot record a conversation using the IC recorder. Recording from other equipment CD player, etc. m (microphone) jack N PLAY/ STOP•ENTER z REC/PAUSE -., >+ x 44 GB