Sony KDL-32N4000 Operating Instructions - Page 17
Preparation of Satellite Speakers Wall-Mounting
View all Sony KDL-32N4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started Preparation of Satellite Speakers Wall-Mounting The Satellite Speakers can be installed on a wall by using a Wall-Mount Bracket (sold separately). 1 Before mounting the Satellite Speakers on a wall, you must remove the stand from the Satellite Speakers. ~ • Use a screwdriver to remove the Satellite Speakers Stand. 2 To install the Satellite Speakers on a wall, you should use the Wall-Mount Bracket WS-WV10D (sold separately). For this accessory use only the screw that is attached to the Satellite Speakers. Use a screwdriver to remove the screw from the Satellite Speakers. ~ • If you use an electric screwdriver, set the torque for tightening at approximately 1.5 N·m {15Kgf·cm}. • Be sure to store the removed screws and the Satellite Speakers Stand in a safe place until you are ready to reattach the stand to the Satellite Speakers. Keep the screws away from children. ~ • Do not remove the Satellite Speakers Stand for any reason other than to wall-mount the Satellite Speakers. (Continued) 17