Sony KDL32L5000 Operating Instructions - Page 44

Specifications Model KDL-22L5000 KDL-26L5000 KDL-32L5000 KDL-37L5000 System Television system NTSC: American TV standard ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality) Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69 Analog Cable: 1 - 135 / Digital Cable: 1 - 135 Panel system LCD (Liquid Crystal Display) Panel Speaker output Input/Output jacks 5 W + 5 W 8 W + 8 W 10 W + 10 W CABLE/ANTENNA 75-ohm external terminal for RF inputs VIDEO IN 1/2 S VIDEO (4-pin mini DIN) (VIDEO 2 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / C: 0.286 Vp-p (Burst signal), 75 ohms VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms COMPONENT IN 1/2 YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms HDMI IN 1/2/3 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits, Dolby Digital AUDIO (HDMI IN 1 only): 500 mVrms (Typical) / Impedance: 47 kilohms PC Input (see page 37) AUDIO OUT 500 mVrms (typical) DIGITAL AUDIO OUT (OPTICAL) PCM/Dolby Digital optical signal PC IN D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive See the PC Input Signal Reference Chart for PC and HDMI IN 1/2/3 on page 37. PC AUDIO INPUT Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms Power and others Power requirement 120-240 V AC, 50/60 Hz Power consumption in use 55 W 75 W 135 W 170 W in standby less than 1.0 W less than 0.5 W Screen size (inches measured diagonally) 21.6 (22 class) 26 31.5 (32 class) 37 Display resolution 1,366 dots (horizontal) × 768 lines (vertical) Speaker/Full range (2) (mm) (inches) 40 × 115 1 5/8 × 4 5/8 42 × 115 1 11/16 × 4 5/8 34 × 175 1 3/8 × 7 Dimensions with stand (mm) (inches) 558 × 417 × 215 22 × 16 1/2 × 8 1/2 679 × 485 × 222 26 3/4 × 19 1/8 × 8 3/4 807 × 557 × 222 31 7/8 × 22 × 8 3/4 927 × 627 × 259 36 1/2 × 24 3/4 × 10 1/4 without stand (mm) (inches) 558 × 370 × 79 22 × 14 5/8 × 3 1/8 679 × 435 × 93 26 3/4 × 17 1/4 × 3 3/4 807 × 508 × 94 31 7/8 × 20 × 3 3/4 927 × 574 × 96 36 1/2 × 22 5/8 × 3 7/8 wall-mount hole pattern (mm) 100 × 100 200 × 100 200 × 200 300 × 300 wall-mount screw size (mm) M4 (length: refer to diagram on page 38) M6 (length: refer to diagram on page 38) Mass with stand (kg) 6.9 10.0 12.7 16.1 (lb.) 15.2 22.1 28.0 35.5 without stand (kg) 6.1 8.7 11.4 14.3 (lb.) 13.5 19.3 25.3 31.5 Supplied accessories Remote control RM-YD028 (1) / Size AA batteries (2) / Operating Instructions (1) / Quick Setup Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) / Attaching the Table-Top Stand (1) / Screws (4 for KDL-26/32/37L5000 / 3 for KDL-22L5000) Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket: see page 2 • Optional accessories availability depends on its stock. • Design and specifications are subject to change without notice. 44