Sony KDL32L5000 Operating Instructions - Page 8
Adjusting the viewing angle of the TV, Video/Component 1 Selection - used
UPC - 027242753037
View all Sony KDL32L5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Item Description 6 VIDEO IN 1/ This input port can be used as a composite video input (VIDEO 1) or as a COMPONENT component video input (COMPONENT 1). For composite use, connect the yellow IN 1 jack to Y/Video for video and use audio L (mono) and R for audio signal. For (1080p/1080i/ component connection, use Y, PB, PR for video signals and also connect the audio L 720p/480p/480i)/ (mono) and R for audio signal. L (MONO)AUDIO-R This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1 when VIDEO 1 or COMPONENT 1 is connected. To set to auto detection, press MENU and go to the Setup settings. Select the Video/Component 1 Selection option then set to Auto. 7 COMPONENT Component video provides better picture quality than the S Video and composite IN 2 video. (1080p/1080i/ Audio connection is required for the COMPONENT IN ports, connect audio (L/R). 720p/480p/480i)/ L-AUDIO-R 8 AUDIO OUT (FIX) L/R Connects to the left and right audio input jacks of your analog audio equipment. You can use these outputs to listen to your TV's audio through your stereo system. 9 AC power cord Plug the cord into the nearest wall outlet. 0 CABLE/ ANTENNA RF input that connects to your Cable or VHF/UHF antenna. • An HDMI or Component video (YPBPR) connection is required to view 480i, 480p, 720p, 1080i and 1080p video formats. 1080/24p is available only with HDMI connection. This TV displays all picture format types in a resolution of 1,366 dots × 768 lines. Adjusting the viewing angle of the TV KDL-22L5000 only This TV can be adjusted within the angle shown below. Adjust the angle back and forth (tilt) Right view 3˚ 8˚ Front 8