Sony KP-51WS510 Operating Instructions - Page 9
Using this manual, Wide Screen Mode, Auto Wide, Flash Focus, Manual Convergence - review
View all Sony KP-51WS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Introducing the Sony Projection TV Introducing the Sony Projection TV ❑ Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in wide screen mode (16:9 aspect ratio). ❑ Auto Wide: Allows you to select the wide screen mode automatically. ❑ Flash Focus™: Allows you to adjust convergence automatically. ❑ Manual Convergence: Allows you to manually adjust the convergence of specific areas of the screen. ❑ Digital Visual Interface (DVI): Can accommodate a copyprotected digital connection (HDCP*) to other devices (such as digital set-top boxes) that have compatible interfaces. The DVI-HDTV input terminal is compliant with the EIA-861 standard and is not intended for use with personal computers. Using this manual We recommend that you carefully review the contents of the following three sections in the order shown to ensure that you fully understand the operation of your new projection TV. 1 Installing and Connecting the Projection TV This section guides you through your initial setup. It shows you how to install your projection TV, to connect your new components and to connect the antenna and cable. 2 Using the Features This section shows you how to begin using your new projection TV. It also shows you how to use your remote control functions. 3 Using the menus This section teaches you how to access on-screen menus and adjust your projection TV settings. Instructions in this manual are written for the remote control. Similar controls are also found on the projection TV console. * High-bandwidth Digital Content Protection 9