Sony MHC-ECL99BT Mode d’emploi - Page 29
Additional Information, Information about compatible devices, Troubleshooting - bluetooth problem connect
View all Sony MHC-ECL99BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Additional Information Information about compatible devices About supported USB devices ˎˎThis system supports USB Mass Storage Class only. ˎˎThis system supports FAT formatted USB devices only (except exFAT). ˎˎSome USB devices may not work with this system. About BLUETOOTH communication for iPhone and iPod touch ˋˋiPhone 5s ˋˋiPhone 5c ˋˋiPhone 5 ˋˋiPhone 4s ˋˋiPhone 4 ˋˋiPod touch (5th generation) ˋˋiPod touch (4th generation) Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. If "PROTECT" appears on the display Immediately unplug the power cord, and check the following items after "PROTECT" disappears. ˎˎAre you using only the supplied speakers? ˎˎIs anything blocking the ventilation holes of the system? After you have checked these above items and found no problems, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. If "OVER CURRENT" appears on the display A problem has been detected with the level of electrical current from the (USB) port. Turn off the system and remove the USB device from the (USB) port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. Additional Information 29GB