Sony MHC-ECL99BT Mode d’emploi - Page 34

Messages DISC ERR You have loaded a disc that cannot be played. ERROR You cannot transfer music to the USB device because the USB device is write-protected or the memory of the USB device is full. FULL You tried to program more than 64 tracks or files (steps). NO FILE There are no playable files on the CD-R/CD-RW discs or on the USB device. NO STEP All of the programmed steps have been erased. NO USB No USB device is connected or an unsupported USB device is connected. PLAY SET You tried to select the timer when the Play Timer is not set. PLS STOP You pressed PLAY MODE/TUNING MODE during playback. SELECT You pressed TIMER MENU during timer operation. TIME NG The Play Timer start and end times are set to the same time. Precautions Discs that this system CAN play ˎˎAudio CD ˎˎCD-R/CD-RW (audio data/MP3 files) Discs that this system CANNOT play ˎˎCD-ROM ˎˎCD-R/CD-RW other than those recorded in music CD format, conforming to ISO9660 Level 1/Level 2 ˎˎCD-R/CD-RW recorded in multisession that have not ended by "closing the session" ˎˎCD-R/CD-RW of poor recording quality, CD-R/CD‑RW that have scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device ˎˎCD-R/CD-RW which is finalized incorrectly ˎˎDiscs containing files other than MPEG 1 Audio Layer-3 (MP3) files ˎˎDiscs of non-standard shape (for example, heart, square, star) ˎˎDiscs that have adhesive tape, paper, or sticker attached to them ˎˎRental or used discs with attached seals where the glue extends beyond the seal ˎˎDiscs that have labels printed using ink that feels tacky when touched Notes on discs ˎˎBefore playing, wipe the disc with a cleaning cloth from the center outward to the edge. ˎˎDo not clean discs with solvents, such as benzine, thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. ˎˎDo not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave them in a car parked in direct sunlight. On safety ˎˎCompletely disconnect the power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. ˎˎShould any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. ˎˎThe AC power cord can be changed only by a qualified service facility. 34GB