Sony MHC-ECL99BT Mode d’emploi - Page 33

To reset the system to factory, European and Russian models

Get Sony MHC-ECL99BT PDF manuals and user guides View all Sony MHC-ECL99BT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

The sound skips or fluctuates, or the connection is lost. ˎˎThe system and the BLUETOOTH device are too far apart. ˎˎIf there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. ˎˎIf there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. The sound of your BLUETOOTH device cannot be heard on this system. ˎˎIncrease the volume on your BLUETOOTH device first, then adjust the volume using VOLUME +/-. There is severe hum, noise or distorted sound. ˎˎIf there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. ˎˎIf there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. ˎˎTurn down the volume of the connected BLUETOOTH device. To change the AM tuning interval (except for North American, European and Russian models) The AM tuning interval is preset to 9 kHz or 10 kHz by factory default. Use buttons on the unit to change the AM tuning interval. 1 Tune to any AM station. 2 Hold down MEGA BASS on the unit until "530" (10 kHz) or "531" (9 kHz) appears on the display. All the AM preset stations are erased. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Hold down  and EQ on the unit until "RESET" appears. All user-configured settings, such as preset radio stations, the pairing registration information, timer, and the clock are reset to factory default settings. To turn off the automatic standby function This system is equipped with an automatic standby function. With this function, the system enters standby mode automatically in about 15 minutes when there is no operation and no audio signal is detected. By default, the automatic standby function is turned on. Hold down  while the system is on, until "AUTO STANDBY OFF" appears. To turn on the function, repeat the procedure until "AUTO STANDBY ON" appears. Notes ˎˎThe automatic standby function is invalid for the tuner function. ˎˎThe system may not enter standby mode automatically in the following cases: ˋˋ when an audio signal is detected. ˋˋ during playback of audio tracks or files. ˋˋ while the preset Play Timer or Sleep Timer is in process. Additional Information 33GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
33
GB
Additional Information
The sound skips or fluctuates, or the
connection is lost.
ˎ
The system and the BLUETOOTH
device are too far apart.
ˎ
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
ˎ
If there is equipment that generates
electromagnetic radiation, such as
a wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
The sound of your BLUETOOTH device
cannot be heard on this system.
ˎ
Increase the volume on your
BLUETOOTH device first, then adjust
the volume using VOLUME +/–.
There is severe hum, noise or
distorted sound.
ˎ
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
ˎ
If there is equipment that generates
electromagnetic radiation, such as
a wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
ˎ
Turn down the volume of the
connected BLUETOOTH device.
To change the AM tuning interval
(except for North American,
European and Russian models)
The AM tuning interval is preset to
9 kHz or 10 kHz by factory default.
Use buttons on the unit to change the
AM tuning interval.
1
Tune to any AM station.
2
Hold down MEGA BASS on the unit
until “530” (10 kHz) or “531” (9 kHz)
appears on the display.
All the AM preset stations are
erased.
To reset the system to factory
settings
If the system still does not operate
properly, reset the system to factory
settings.
1
Disconnect and reconnect the
power cord, and then turn on the
system.
2
Hold down
and EQ on the unit
until “RESET” appears.
All user-configured settings, such
as preset radio stations, the pairing
registration information, timer,
and the clock are reset to factory
default settings.
To turn off the automatic standby
function
This system is equipped with an
automatic standby function. With
this function, the system enters
standby mode automatically in about
15 minutes when there is no operation
and no audio signal is detected.
By default, the automatic standby
function is turned on.
Hold down

while the system
is on, until “AUTO STANDBY OFF”
appears.
To turn on the function, repeat the
procedure until “AUTO STANDBY ON”
appears.
Notes
ˎ
The automatic standby function is invalid
for the tuner function.
ˎ
The system may not enter standby mode
automatically in the following cases:
when an audio signal is detected.
during playback of audio tracks or files.
while the preset Play Timer or Sleep
Timer is in process.