Sony MHC-NX1 Operating Instructions (primary manual) - Page 12

Recording a CD (continued) 2 Press one of the CD 1~5 § buttons and place a CD. Then press again to close the disc tray. With the label side up. When you play a CD single, place it on the inner circle of the tray. · ∏ π § 1 2 3 4 5 ª· π ª· π § § Listening to the radio -- Preset Tuning Preset radio stations in the tuner's memory first (see "Step 3: Presetting radio stations"). 1/u (Power) 2 1 STEREO/MONO 3 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up. 4 Press DIRECTION repeatedly to select A to record on one side. Select ß (or RELAY) to record on both sides. 5 Press REC PAUSE/START. Recording starts. To stop recording Press π on deck B or on the CD player. 1 =/+ Tips • If you want to record from the reverse side, press ª so that ª (for reverse side) lights up. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR so that "DOLBY NR" appears after pressing CD SYNC. Notes • You cannot listen to other sources while recording. • Dolby NR is off and DIRECTION (A or RELAY) is ß when the mains AC power supply is switched off. - + 0 ) ≠ + - + g -/+ VOLUME · ª· ª· =+ p 0 ) P V B b v · p VOLUME +/- 12