Sony MHC-NX1 Operating Instructions (primary manual) - Page 16

Playing a tape (continued) To Do this Stop play Press π (or p on the remote). Fast-forward Press ) on the remote while playing the front side or 0 while playing the reverse side. Rewind Press 0 on the remote while playing the front side or ) while playing the reverse side. Remove the cassette Press § . Adjust the volume Turn VOLUME (or press VOLUME +/- on the remote). Tips • Pressing · or ª when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. • You can switch from another source to the tape deck just by pressing · or ª (Automatic Source Selection). • If the tape you want to play is recorded with DOLBY NR, you can reduce the noise by pressing DOLBY NR so that "DOLBY NR" lights up. • When dubbing tapes originally recorded with Dolby NR, the dubbed tape is automatically played with Dolby NR. Searching for the beginning of a track (AMS*) During playback, turn the jog dial the same direction as the ª or · indicator to go forward. Turn the opposite direction to go back. (Or press = or + on the remote.) The search direction, + (forward) or - (back), and number of songs being skipped (1~9) appear in the display. Example: searching forward 2 songs DOLBY NR * AMS (Automatic Music Sensor) Notes • The AMS function may not operate correctly under the following circumstances: - When the unrecorded space between songs is less than 4 seconds long. - If completely different information is recorded on the left and right channels. - When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). - When the unit is placed near a television. (In this case, we recommend moving the unit farther away from the television or turning off the television.) • Dolby NR is off and DIRECTION (A or RELAY) is ß when the mains AC power supply is switched off. 16