Sony MHC-NX1 Operating Instructions (primary manual) - Page 8

Step 3: Presetting radio stations You can preset the following number of stations: - 2 band model: 20 for FM, 10 for AM. - 3 band model: 20 for FM, 10 for MW, and 10 for SW, or 20 for FM, 10 for AM and 5 for UKV, depending on the model you purchased. 1/u (Power) Jog dial 13 - + 0 ) ≠ + - + g 24 n n 1 Press TUNER BAND repeatedly until the band you want appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press this button, the band changes as follows: 2 band model: FM ˜ AM 3 band model: FM n MW n SW or FM n AM n UKV* * "STEREO PLUS" is displayed when you select UKV. 2 Press and hold + or - until the frequency indication starts to change, then release. Scanning stops when the system tunes in a station. "TUNED" and "STEREO" (for a stereo program) appear. TUNED STEREO MHz 3 Press TUNER MEMORY. A preset number flashes in the display. The stations are stored from preset number 1. Preset number TUNED STEREO 4 Press ENTER. The station is stored. 5 Repeat steps 1 to 4 to store other stations. 8