Sony MHC-NX1 Operating Instructions (primary manual) - Page 42

Specifications - - mini system

Page 42 highlights

Specifications Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 6 ohm loads both channels driven, from 70-20,000 Hz; rates 100 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output. North American model Front Speaker: Continuous RMS power output (reference) 130 + 130 watts (6 ohms at 1 kHz, 10% THD) Total harmonics distortion Less than 0.07% (6 ohms at 1 kHz, 40 W) European model Front Speaker: DIN power output (rated) 80 + 80 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 100 + 100 watts (6 ohms at 1 kHz, 10% THD) Music power output (reference) 160 + 160 watts (6 ohms at 1 kHz, 10% THD) Other models The following measured at AC 120/220/240 V, 50/60 Hz Front Speaker: DIN power output (rated) 90 + 90 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 110 + 110 watts (6 ohms at 1 kHz, 10% THD) Inputs VIDEO IN: (phono jacks) MD IN: (phono jacks) MIC: (mini jack) Outputs MD OUT: (phono jacks) PHONES: (stereo mini jack) FRONT SPEAKER: REAR SPEAKER: SUPER WOOFER: voltage 250 mV, impedance 47 kilohms voltage 450 mV, impedance 47 kilohms sensitivity 1 mV, impedance 10 kilohms voltage 250 mV impedance 1 kilohms accepts headphones of 8 ohms or more accepts impedance of 6 to 16 ohms accepts impedance of 16 ohms Voltage 1 V, impedance 1 kilohms CD player section System Compact disc and digital audio system Laser Semiconductor laser (λ=780nm) Emission duration: continuous Laser output Max. 44.6 µW* *This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Wavelength 780 - 790 nm Frequency response 20 Hz - 20 kHz (±0.5 dB) Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB CD DIGITAL OUT (Square optical connector jack, rear panel) Wavelength 660 nm Output Level -18 dBm Tape player section Recording system Frequency response (DOLBY NR OFF) Wow and flutter 4-track 2-channel stereo 40 - 13,000 Hz (±3 dB), using Sony TYPE I cassette 40 - 14,000 Hz (±3 dB), using Sony TYPE II cassette ±0.15% W.Peak (IEC) 0.1% W.RMS (NAB) ±0.2% W.Peak (DIN) 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

42
Inputs
VIDEO IN:
voltage 250 mV,
(phono jacks)
impedance 47 kilohms
MD IN:
voltage 450 mV,
(phono jacks)
impedance 47 kilohms
MIC:
sensitivity 1 mV,
(mini jack)
impedance 10 kilohms
Outputs
MD OUT:
voltage 250 mV
(phono jacks)
impedance 1 kilohms
PHONES:
accepts headphones of 8
(stereo mini jack)
ohms or more
FRONT SPEAKER:
accepts impedance of 6 to
16 ohms
REAR SPEAKER:
accepts impedance of 16
ohms
SUPER WOOFER:
Voltage 1 V, impedance 1
kilohms
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(
λ
=780nm)
Emission duration:
continuous
Laser output
Max. 44.6
μ
W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength
780 – 790 nm
Frequency response
20 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
CD DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
660 nm
Output Level
–18 dBm
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
40 – 13,000 Hz (±3 dB),
(DOLBY NR OFF)
using Sony TYPE I
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Specifications
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
North American model
Front Speaker:
Continuous RMS power output (reference)
130 + 130 watts
(6 ohms at 1 kHz,
10% THD)
Total harmonics distortion
Less than 0.07%
(6 ohms at 1 kHz, 40 W)
European model
Front Speaker:
DIN power output (rated) 80 + 80 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (reference)
160 + 160 watts
(6 ohms at 1 kHz,
10% THD)
Other models
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 90 + 90 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
110 + 110 watts
(6 ohms at 1 kHz,
10% THD)