Sony MHC-NX1 Operating Instructions (primary manual) - Page 37
Connecting external, antennas
View all Sony MHC-NX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Connecting external antennas Connect the external antenna to improve the reception. Refer to the instructions of each component. FM antenna Connect the optional FM external antenna. You can also use the TV antenna instead. Jack type A IEC standard socket connector (not supplied) AM CFMO7A5XIAL AM antenna Connect a 6- to 15- meter (20- to 50- feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Jack type A Insulated wire (not supplied) AM CFMO7A5XIAL Jack type B Insulated wire (not supplied) Jack type B AM AM FM 75Ω 75-ohm coaxial cable (not supplied) Note Set up the AM loop antenna as far as possible from the main unit. 37
37
AM
AM
FM75
COAXIAL
FM 75
Ω
AM
AM
FM75
COAXIAL
Insulated wire (not supplied)
Connecting external
antennas
Connect the external antenna to improve the
reception. Refer to the instructions of each
component.
FM antenna
Connect the optional FM external antenna.
You can also use the TV antenna instead.
Jack type
A
Jack type
B
AM antenna
Connect a 6- to 15- meter (20- to 50- feet)
insulated wire to the AM antenna terminal.
Leave the supplied AM loop antenna
connected.
Jack type
A
Jack type
B
Insulated wire (not supplied)
75-ohm coaxial cable
(not supplied)
IEC standard socket
connector (not supplied)
Note
Set up the AM loop antenna as far as possible from
the main unit.