Sony MHC-RXD10AV Operating Instructions - Page 15

Recording a CD

Get Sony MHC-RXD10AV - 3 Cd Mini Shelf System PDF manuals and user guides View all Sony MHC-RXD10AV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Basic Operations Recording a CD - CD Synchro Recording The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically. DISC SKIP/ EX-CHANGE (Power) DOLBY NR CD (P 2 2 Press § and place a CD. Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP/ EX-CHANGE repeatedly so that it lights green. With the label side up. When you play a single CD, place it on the inner circle of the tray. 3 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ( (for front side) lights up. 4 Press DIRECTION repeatedly to select A to record on one side. Select ß (or RELAY) to record on both sides. 5 Press REC PAUSE/START. Recording starts. 4 p 5 31 1 Press § and insert a recordable tape into deck B. With the side you want to record facing forward To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9 to light its indicator after pressing CD SYNC. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR so that "DOLBY NR" appears after pressing CD SYNC. Note You cannot listen to other sources while recording. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Basic Operations
15
CD
(P
p
DISC SKIP/
EX-CHANGE
DOLBY NR
The CD SYNC button lets you record from a
CD to a tape easily.
You can use TYPE I
(normal) or TYPE II (CrO
2
) tapes.
The
recording level is adjusted automatically.
Recording a CD
— CD Synchro Recording
With the side
you want to
record facing
forward
2
4
1
53
2
Press
§
and place a CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
EX-CHANGE repeatedly so that it lights
green.
3
Press CD SYNC.
Deck B stands by for recording and the
CD player stands by for playback. The
indicator on TAPE B
(
(for front side)
lights up.
4
Press DIRECTION repeatedly to
select
A
to record on one side.
Select
ß
(or RELAY) to record on
both sides.
5
Press REC PAUSE/START.
Recording starts.
To stop recording
Press
p
.
Tips
• If you want to record from the reverse side, press
TAPE B
9
to light its indicator after pressing CD
SYNC.
• When you record on both sides, be sure to start
from the front side.
If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing CD
SYNC.
Note
You cannot listen to other sources while recording.
With the label
side up.
When
you play a single
CD, place it on
the inner circle
of the tray.
(Power)
1
Press
§
and insert a recordable tape
into deck B.