Sony MHC-RXD10AV Operating Instructions - Page 6

Inserting two size AA R6, Step 1, Hooking up the system, continued

Get Sony MHC-RXD10AV - 3 Cd Mini Shelf System PDF manuals and user guides View all Sony MHC-RXD10AV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Step 1: Hooking up the system (continued) 6 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press , the system turns on and the demonstration automatically ends. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). To connect optional components See page 45. To deactivate the demonstration When you set the time (Step 3: Setting the time), the demonstration is deactivated. To activate/deactivate the demonstration again, press DISPLAY (MHC-RXD10AV) or DEMO (STANDBY) (MHC-GRX90AV) while the system is off. Tip You can reinforce the bass sound by connecting an optional super woofer to the super woofer connector. To attach the speaker pads Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Front speaker Inserting two size AA (R6) batteries into the remote ] } } ] Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until "CD" appears in the display. 2 Hold down LOOP and press so that "LOCK" appears in the display. Center surround speaker 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
6
6
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press
, the
system turns on and the demonstration
automatically ends.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
To connect optional components
See page 45.
To deactivate the demonstration
When you set the time (Step 3: Setting the
time), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY (MHC-RXD10AV) or
DEMO (STANDBY) (MHC-GRX90AV) while
the system is off.
Tip
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer
connector.
To attach the speaker pads
Attach the supplied speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
Front speaker
Center surround speaker
Inserting two size AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months.
When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1
Press FUNCTION repeatedly until “CD”
appears in the display.
2
Hold down LOOP and press
so that
“LOCK” appears in the display.
]
}
]
}
Step 1:
Hooking up the system
(continued)