Sony MHC-RXD10AV Operating Instructions - Page 8
Adjusting the speaker, volume, Press T.TONE ON/OFF when
View all Sony MHC-RXD10AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Step 2: Setting up your speakers (continued) Adjusting the speaker volume To enjoy Dolby Pro Logic Surround sound, turn the Dolby Pro Logic mode on, then adjust the volume of each speaker using the test tone that the system provides. (Power) 1 ◊ √ · ª· ª· =+ p 0 ) P · P p ◊ √ 1 2, 4 3 1 Press PRO LOGIC (or PRO LOGIC ON/OFF on the remote). "PRO LOGIC ON" appears. 2 Press T.TONE ON/OFF on the remote. The test tone is heard from the speakers in the following order. Adjust the volume of the test tone. n LEFT (front) n CENTER n RIGHT (front) REAR N 3 From your listening position, press CENTER LEVEL (+/-) and REAR LEVEL (+/-) on the remote to adjust the volume. The volume levels from each speaker must become the same. 4 Press T.TONE ON/OFF when you are done adjusting. The test tone turns off. Tip If you turn VOLUME (or press VOLUME +/- on the remote) all the speaker volumes change. Note The test tone feature works only for Dolby Pro Logic Surround sound. 8