Sony MHC-RXD10AV Operating Instructions - Page 19

◊ √ · ª· ª· =+ p 0 ) P · P p ◊ √ DECK A ª · DECK B ª · = + p 0 ) VOLUME +/- 1 Press § and insert a recorded tape in deck A or B. With the side you want to play facing forward * The deck stops automatically after repeating the sequence five times. ** Relay play always follows the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). To Do this Stop play Press p. Fast-forward Press 0 or ). Rewind Press 0 or ). Remove the cassette Press §. Adjust the volume Turn VOLUME (or press VOLUME +/- on the remote). Tips • Pressing TAPE A (or TAPE B) ( or 9 when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. • You can switch from another source to the tape deck just by pressing TAPE A (or TAPE B) ( or 9 (Automatic Source Selection). • When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR so that "DOLBY NR" appears. continued Basic Operations 2 Press DIRECTION repeatedly to select A to play one side. Select ß* to play both sides. To play both decks in succession, select RELAY (relay play).** 3 Press TAPE A (or TAPE B) ( (DECK A (or DECK B) ª· on the remote). Press TAPE A (or TAPE B) 9 to play the reverse side. (Press DECK A (or DECK B) ª· again on the remote to play the reverse side.) The tape starts playing. 19