Sony MHC-V13 Help Guide - Page 35
Pairing and connecting with BLUETOOTH devices
View all Sony MHC-V13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Help Guide Home Audio System MHC-V13 Pairing and connecting with BLUETOOTH devices When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device. Before operating the system, be sure to do the following: Place the BLUETOOTH device within 1 m (3.2 ft) from the system. Stop playback on the BLUETOOTH device. Turn down the volume of the BLUETOOTH device and system to avoid any sudden loud sound output from the system. Depending on the BLUETOOTH device, the volume of the device may be synchronized with the system. Prepare the operating instructions supplied with the BLUETOOTH device for reference. 1 Select the BLUETOOTH function. 1. Press (power) to turn on the system. 2. Press FUNCTION repeatedly until [BLUETOOTH] appears on the display. Hint When there is no pairing information on the system (for example, when you use the BLUETOOTH function for the first time after purchase), [PAIRING] flashes on the display and the system enters the pairing mode. Proceed to step . When you turn on the system, the system tries to make a BLUETOOTH connection with the last connected BLUETOOTH device. If the device is nearby and its BLUETOOTH function is on, the BLUETOOTH connection is established automatically and the BLUETOOTH device name appears on the display. In this case, turn off the BLUETOOTH function or turn off the power of the currently connected BLUETOOTH device. 2 Hold down BLUETOOTH/ the display. PAIRING on the system for more than 3 seconds until [PAIRING] flashes on 3 Perform the pairing procedure on the BLUETOOTH device to detect the system. When a list of detected devices appears on the display of the BLUETOOTH device, select [MHC-V13]. Perform this step within 5 minutes, otherwise pairing will be canceled. In this case, repeat from step . If a passkey* is required on the display of the BLUETOOTH device, enter [0000]. * The passkey may also be called a "passcode," "PIN code," "PIN number" or "password." 4 Make the BLUETOOTH connection from the BLUETOOTH device. 35