Sony MHC-V13 Help Guide - Page 36
To cancel the pairing operation, To erase pairing information
View all Sony MHC-V13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
When the BLUETOOTH connection is established, the BLUETOOTH device name appears on the display and the BLUETOOTH indicator lights up. To cancel the pairing operation Press BLUETOOTH/ PAIRING on the system. To erase pairing information You can erase all pairing information by resetting the system. Hint For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device. Note For Apple iOS devices, the system is compatible with iOS 11.0 or later. Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases: Pairing information has been deleted after re-pair, etc. The system is already paired with 8 devices and another device is to be paired. The system can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the device that was paired earliest is replaced by the new one. The pairing information of the system has been deleted from the BLUETOOTH device. After you reset the system, it may not be able to connect with your iPhone/iPod. In this case, delete the pairing information of the system on your iPhone/iPod, then perform the pairing operation again. The system can be paired with multiple devices, but can only play music from one paired device at a time. Related Topic Terminating the BLUETOOTH connection (After use) The system does not operate properly. 5-013-968-11(1) Copyright 2020 Sony Corporation 36