Sony MVC-CD350 Operating Instructions - Page 14
Using an external power source, Using your camera abroad, Connect the power cord to
View all Sony MVC-CD350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using an external power source DC IN jack cover DC plug 1 AC Adaptor , Open the DC IN jack cover and connect the AC Adaptor (supplied) to the DC IN jack of your camera. Connect the DC plug with the v mark facing forward. • Connect the AC Adaptor to an easily accessible wall outlet close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet. 2 To wall outlet Power cord 1 2 AC Adaptor , Connect the power cord to the AC Adaptor and then to a wall outlet. • When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera. • The set is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the unit itself has been turned off. Using your camera abroad Power sources You can use your camera in any country or region with the supplied AC Adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b]. AC-L15A/L15B • Do not use an electronic transformer (travel converter), as this may cause a malfunction. 14