Sony MVC-CD350 Operating Instructions - Page 46
Setting the distance to the subject, Adjusting the exposure, Focus preset, To reactivate auto focusing
View all Sony MVC-CD350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Setting the distance to the subject - Focus preset Mode dial: /SCN/ When shooting an image using a previously set distance to the subject, or when shooting a subject through a net or through window glass, it is difficult to get the proper focus in auto focus mode. In these cases, use of the Focus preset is convenient. Control button Mode dial MENU 46 a Set the mode dial to or . , SCN, b Press MENU. The menu appears. c Select 9 (Focus) with b/B, then select the distance to the subject with v/V. You can select from the following distance settings 0.5m, 1.0m, 3.0m, 7.0m and ∞ (infinity) 7.0m 3.0m 1.0m 0.5m Center AF Multi AF Focus 1.0m WB ISO To reactivate auto focusing In step 3, select 9 (Focus), then select [Multi AF] or [Center AF]. • Focus setting information is approximate, and should be used as a reference. • If you point the lens up or down, the error will increase. • If you select 0.5 m (9 3/4 inches) with the zoom set to the T side, you may not get a clear focus. In such cases, the focus setting information flashes. Press the zoom W button until the indicator stops flashing. • The focus preset does not work properly when attaching a conversion lens (not supplied). Adjusting the exposure - EV adjustment Mode dial: /SCN/ This lets you adjust the exposure value which is set by automatic adjustment. You can select values ranging from +2.0EV to -2.0EV in steps of 1/3EV. Control button Mode dial MENU