Sony NEX-VG900 "Handycam" Handbook - Page 20
To remove the mount adaptor, If dust or debris adheres on the image sensor - lens
View all Sony NEX-VG900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table of Contents Search image To remove the mount adaptor Hold down the lens release button on the camcorder body and turn the mount adaptor counterclockwise until it stops. Carefully lift the mount adaptor out of the camcorder's mount. Lens release button If dust or debris adheres on the image sensor Turn off the camcorder and detach the lens. Clean the image sensor and the surrounding area using a blower (sold separately), and then reattach the lens. Notes Do not use a spray blower because it may scatter water droplets inside the camcorder body. Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not touch the image sensor. Hold the camcorder's face downward to prevent the dust from resettling in the camcorder. Do not apply a mechanical shock to the camcorder during cleaning. If you cannot clean the image sensor by the above procedure, consult your Sony dealer or local authorized Sony service facility. US 20 Index