Sony NEX-VG900 "Handycam" Handbook - Page 92
Playback on the TV, Copying/Connecting to other, devices, Connecting to a computer
View all Sony NEX-VG900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Table of Contents Search image A photo cannot be captured from a movie (NEX-VG900). The memory card where you want to save photos is full. Playback on the TV Neither image nor sound is played on the connected TV. When you are using the component A/V cable, set [Component] according to the requirements of the connected device (p. 83). When you are using the component video plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 36). Images are not output from the HDMI OUT jack, if copyright protection signals are recorded in the images. When you are using the S VIDEO plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 37). When [24p Mode] is activated, recorded images may not be played back even though the camcorder is connected to a PAL-based TV (NEX-VG900E). The top, bottom, right, and left edges of images are trimmed slightly on a connected TV. The LCD screen of your camcorder can display recording images across the entire screen (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display. It is recommended you record images using the outer frame of [Guide Frame] (p. 75) as a guide. The image appears distorted on the 4:3 TV. This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV Type] correctly (p. 82) and play back the image. Black bands appear at the top and bottom of the screen of the 4:3 TV. This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. This is not a malfunction. Copying/Connecting to other devices Images are not copied correctly. You cannot copy images using the HDMI cable (sold separately). The A/V connecting cable is not connected properly. Make sure to connect the cable to the input jack of another device (p. 63). Connecting to a computer "PlayMemories Home" cannot be installed. Check the computer environment or installation procedure required to install "PlayMemories Home." "PlayMemories Home" does not work correctly. Quit "PlayMemories Home" and restart your computer. The camcorder is not recognized by the computer. Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. Disconnect the USB cable (supplied) from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in the correct order. Index US 92